一、上胶速度太快
　　1、 Glue application speed is too fast
　　一些客户为了加快自己的生产节奏生产计划后,调整密封剂认为速度太快,导致胶体仍没有完全达到合格标准的头已经到下一个位置胶操作,如果我们需要加速调整胶胶机运动参数,所以我们也要有相应的相应设置胶供应系统,如这一次我们需要增加供应压力,增加上胶速度，使上胶机随物体移动速度增加。如果只增加上胶机的移动速度而不调整压力，很可能会导致上胶不充分。
　　In order to speed up the production schedule, some customers adjust the sealant to think that the speed is too fast, so that the head of the sealant which still does not meet the qualified standard has reached the next position. If we need to speed up the adjustment of the movement parameters of the glue machine, we also need to set the corresponding glue supply system, such as this time we need to increase the supply pressure, Increase the speed of gluing, so that the speed of gluing machine increases with the movement of objects. If only increase the moving speed of the gluer without adjusting the pressure, it is likely to lead to insufficient gluing.

　　2. 供胶压力不足
　　2. Insufficient glue supply pressure
　　这种情况其实小编在案例中已经描述过了，即使不调整胶水机的运行速度也会出现不全是胶水的情况，那么有可能是胶水压力太小了。此时我们只需要调整供给压力就可以很好的解决这个问题。
　　This situation has been described in the case. Even if the running speed of the glue machine is not adjusted, it may not be all glue. Then the glue pressure may be too small. At this time, we just need to adjust the supply pressure to solve this problem.
　　3.鼻子传感器损坏
　　3. Nose sensor damaged
　　这种情况很少见，但也有可能发生。在我们的上胶机的头部有一个传感器来检测铝棒的深度。如果发现铝棒过深或过浅，它会自动调整移动速度和供应压力(自动调节范围在小范围内)。如果我们的铝杆本身在深度上不同，除了我们的心情会发生坏断外!
　　This is rare, but it can happen. At the head of our dispenser there is a sensor to detect the depth of the aluminum bar. If it is found that the aluminum bar is too deep or too shallow, it will automatically adjust the moving speed and supply pressure (the automatic adjustment range is in a small range). If our aluminum rods are different in depth, except our mood will break!
　　以上就是对双组份打胶机打胶不饱满的原因的详细介绍，想要了解更多请点击官网http://linshi.jncsjx.com
　　The above is a detailed introduction to the reason why the two-component dispenser is not full. For more information, please click http://linshi.jncsjx.com